Tire recycling machine specific machine introduction1. Steel wire drawing machine
Structural featuresThe blade of cutter is made of alloy welding and the surface is hard wear-resisting.
On safety factor, this machine have protective frame, which can effectively guarantee safety in the process of pulling out wire loop.
Motor and reducer, and as a whole, the structure is compact.
The machine occupies the whole floor, convenient installation.
Pulling out the wire loops from the mouth of waste tires.
** Before cutting and grinding use steel wire drawing machine, it can protect the blades of tire shredder, prolong the service life of the blade and increase the working efficiency of the shredder ;
**.This model is composed of motor, hydraulic system, steel wire retractor, pull mouth, body;
**.The motor drives hydraulic system and oil cylinder, and steel wire retractor is connected to the cylinder pull rod. The movement of oil pump and oil cylinder makes wire retractor do reciprocating movement.2. Tire cutter for big tire
The basic principle is: motor drives hydraulic system and the cylinder, place the tire to lock arm, fasten two blades rotating between tire and shear cylinders work to move, two blades rotating blades forming shear, achieve the effect of shear.
This equipment, good shear effect, shearing speed, low energy consumption, small volume, convenient, because use the hydraulic system, easy operation and safe.
Mechanical description: the tires more than 800 need to cut, and cut into four pieces in general .the size of piece is 200-500mm.
Notes for using tire cutter:
a. Inspect the knives frequently, if appear obvious blunt, it should be maintain timely, and the service is 2-3 years.
b. the oil in hydraulic station should be filtered and changed regularly. Generally filter once every one and half year.
c. Wearing parts: rubber seals, delivered with another set when ship the machine to the buyer.3. Tire shredder machine introduction and technical data
This machine can directly crush tires smaller than 800mm tires. At the general temperature, can be put directly crushed into 50 * 50 mm block,
This machine is a compact structure, advanced technology, low energy consumption, high efficiency, smashing off the test room for the structure, maintenance is particularly convenient; tools with carbide surfacing technology, high hardness, high wear resistance, and repeated repair using, so has a longer service life; rotary screen for the lattice structure of steel mesh, blanking large area, enabling the screening of qualified rubber. After the partition of large tires can achieve the effect of the same!
Mechanical description: the tires of 800mm diameter and rubber ring can directly be broken into 50*50 mm of rubber block.
Notes for using whole tire shredder:
a. Inject gear oil into gearbox oil (hypoid gear oil), main bearings use calcium-based grease lubrication, three months after the operation of the machine, the oil should be replaced and clean the fuel tank. Since then change the oil once time every year.
b After deal with 3,000 tons of waste rubber (in normal circumstances),the buyer should grind the blade cutting edge once time. The blades is the wear parts, the general service life is 5-6 years, when delivering the machine to the buyer, the shredder will be equipped with edge hardness layer patching material (electrodes).
**. The shredder machine has the advantage of compact structure, advanced technology, low consumption, high efficiency;
**. The grinding chamber is of open structure, convenient repair and maintenance;
**. The speed reducer adopts hard-toothed surface reducer, high precision, high transmission efficiency, stable operation, low noise, small volume, light weight, and long service life.
**. Electronic control system is for PLC programming with start, stop, forward, inversion and overload automatic protection function.
**. There is a large application range, it can shed plastic box, cartons, cans, paint bucket, rubber and so on.4. Double Rolls Rubber Crusher
Mainly used for crack large rubber blocksznd grind into 10-30 meshes powder.5. Nylon sorting machine
Ourcompany and customer visiting