portable dust collector ,bag filter of dust collector woodworking Single pulse jet bag filterproduct introductionBag filter is suitable for refractory processing dust removal, steel making electric furnace flue gas dust removal, abrasive processing workshop dust removal, calcium carbide furnace production dust removal, blast furnace gas purification, pulverized coal preparation dust removal, asphalt concrete production dust removal, carbon black production dust removal, dedusting of building materials, dedusting in the chemical industry, dust removal in electrolytic aluminum processing, dust removal during aluminum and zinc smelting.Equipment Feature1. Adopting international advanced proprietary step-in and out airflow distribution technology and ash bucket diversion technology, it not only can distribute airflow evenly, but also can effectively reduce equipment resistance and extend the service life of filter bags.
2. Adopt multi-tube cold air and supplement air proprietary technology in double valve plate to ensure zero leakage of the system;
3. High-efficiency cleaning can be realized more effectively by using large-capacity pulse-jet combination technology;
4. Adopt imported pulse valve (pulse solenoid valve), the life of the vulnerable piece diaphragm is more than 1 million times, and the solenoid valve warranty is three years.
5. The conventional configuration uses special filter materials for industrial kiln, and the normal service life of the filter bag is more than 2 years.
Principle of Cleaning up DustProgram controller successively starts pulse valve at a fixed time, then compressed air(0.5~0.7MPa) squirts from spray orifice and enter into filter bag, leading to a dramatic expansion of the filter bag. Because of the effect of reverse, the dust attaching on the surface of the filter bag will enter into ash hopper (or ash bin) and be removed through dust valve so as to achieve the purpose of dust removal.
Principle of Operation1. The dusty gas enters into filter bag house from hopper, and is discharged via ID fan after purification. The operation of injection system is automatically controlled in order to guarantee the efficiency of dust removal.
2. Dusty gas enters into chamber from gas inlet to the ash hopper through the open flange outlet, after the purification of bag filter, dusty gas goes into the net gas chamber and then it is discharged by fan. Dust is attached to the outer surface, and the resistance increases gradually, so that the resistance of bag filters dust collector increases as well. In order that resistance of device does not exceed 1200Pa, the equipment can work continuously; dust which attached to bag filter needs to be regularly removed.Principle of Working1:The dust-containing gas enters the dust collector from the air inlet of the ash bucket, through the lower ash bucket enters the filter chamber, and the coarser particles fall into the ash bucket directly . The clean air filtered by the filter bag enters the clean air chamber, and discharged into the atmosphere by the fan.
2:This series uses uninterrupted circulating ash cleaning.When the dust is cleaned, the pulse controller sends a signal to sequentially open each pulse valve, and the compressed air in the air separation bag instantaneously enters the filter bag through the pulse valve to the blowing pipe, and the filter bag expands rapidly, causing the dust layer on the surface of the filter bag to fall off, and the filter bag Resistance is restored.3:The dust removal device adopts the lower air inlet and the outer filter type, and the cleaning method is pulse jet cleaning, which is simple and convenient to operate, safe and reliable.
|Capacity / Model||32||48||64||80||96||112|
|Air volume (m³/h)||1500-2100||2100-3200||2900-4300||4000-6000||5200-7000||6000-9000|
|Filter area (M2)||24||36||48||60||72||84|
|Wind speed (m/min)||1.0-1.5||1.0-1.5||1.0-1.5||1.1-1.7||1.2-1.7||1.2-1.8|
|Number of filter bags(piece)||32||48||64||80||96||112|
|Inlet gas temperature(ºC)||≤ 120|
|Equipment resistance(Pa)||≤ 1200|
|Outlet concentration(mg/nm³)||≤ 50|
|Air source pressure(Mpa)||0.4-0.6|
|Air consumption for cleaning(m³/min)||0.10||0.14||0.20||0.24||0.29||0.34|
|Understand negative pressure(Pa)||5000|
| Number of pulse valves(piece)||4||6||8||10||12||14|
| Fan blower (kw)||1.5||3.0||3.0||5.5||5.5||7.5|
Dust collector 30mg/cbm PLC control for furnace/foundry/cement/grinding/welding/power plantOur Services 1. Reply your inquiry in 24 working hours.2. Experienced staffs answer all your questions in fluent English.3. Customized design is available. UEM&UBM are welcomed.4. Exclusive and unique solution can be provided to our customer by our well-trained and professionalengineers and staff.5. Special discount and protection of sales are provided to our distributor.6. Professional factory : We are manufacturer, specializing in producing all kinds of machinery formore than 20 years, competitive with good quantity.7As an honest seller, we always use superior raw material, advanced machines, skilled technicians toensure our products to be finished in high quality and stable feature.8 Equipment warranty and After-sale Assurance Engineers available to service machinery overseas( except force majeure, inappropriate operation and the quick-wear parts wears).9. The equipment will pass the installment and test before delivery, after the quality is qualified,we will disassembly the equipment, coating and deliver.